What should the villa elevator do to make the effect better?

1. Hoistway location and space setting:

The hoistway position space determines the elevator space and door opening size. It is a good plan to install an elevator under the stairs and combine it with the stairs. Generally, pay attention to three aspects: the bottom of the stairs, the corners, and the external hangers can be used. The center will never block the passage as it is not good. Use the door opening width to reverse the hoistway width, and use the highest point on the top floor to reverse the car height. The recommended load capacity is 3-4 people, 400KG, and the inner size of the car is 0.8-1.2 square meters.

2. Confirmation of style:

The choice and determination of styles are important to consider the hoistway environment and personal preferences, and then the cost and difficulty are considered again. Generally speaking, a closed hoistway should be equipped with a closed car, and a sightseeing hoistway should be equipped with a sightseeing car. It is also what kind of hoistway is equipped with what style. Maybe some can choose three-sided sightseeing or partial sightseeing style, which is the most pleasant the way.

3. Notes on functions and safety measures:

In daily life, we often notice that the users of home elevators lack professional knowledge of elevators, and there are no dedicated elevator service personnel, but the safety must not be reduced. Therefore, although it is a home elevator, it is best understood according to the passenger elevator standard. , Prevent some security measures.

4. The plane layout and appearance of the car:

Generally speaking, in order to save area, double-leaf side-opening automatic doors are mostly adopted, and the side-mounted scheme is also more appropriate. Under normal circumstances, the villa elevator adopts the industry's stable hoistway standard with a width of 1200mm. For the corresponding car, the width of the car is 850mm. At 700mm. Most of them prefer to install home elevators in the empty space of the U-turn stairs, and the steel structure hoistway or the aluminum alloy frame hoistway that comes with the elevator has weak ventilation design.

5. Design and installation of bottom pit and top floor:

Generally speaking, the bottom pit is used as an installation buffer and accommodates the middle of the car. Some jumpers cannot dig the bottom pit, and the highest point on the top floor is large. Therefore, the OTSE home elevator is designed quickly and adapts to local conditions. Usually the small bottom pit is 100mm, and the bottom pit can also be borrowed from the decorative ground. The highest point of the bottom layer should be greater than 2350mm.

6. Speed design:

Generally speaking, the floors of family houses are by no means very low. It is also important to use for the elderly and people with reduced mobility. Therefore, the speed should not be so slow. The 3rd floor is 0.2m/s, and the 3rd floor is more than 0.25~0.3m/s. Up.

If you also want to install a villa elevator, please contact us: elevator supplier.